Zosi 1080p 4in1 Hd Outdoor Bullet Cctv Surveillance Security Camera Night Vision

 ⏰Sept. 5th - 18th🔊🔊🔊Whole Store 20% OFF

Code: SAVETWENTY
no min, $100 max, 2x use

Noted Before Buy

1. This camera needs to be wired with BNC video cable and power cable.

But it doesn't include BNC extension cable or power adaptor.  

2. This camera is hard wired camera,needs work with DVR,but it doesn't come with DVR.

ZOSI 4-IN-1 Security Camera Specification

Image Sensor: 1/3〞CMOS CMOS with IR-Cut.

Active Pixels: 1920(H)×1080(V).

Resolution: 1080P .

Lens: 3.6mm

LEDs Amount: 24pcs, 5mm LEDs

Singal mode: TVI/AHD/CVI/CVBS 960H.

IR Distance: up to 80ft

Weather - Resistant

1080p Full HD Resolution

See everything in details with true 1080p HD resolution. Get clearer and smoother images/videos than 720p cameras.

CVBS/CVI/AHD/TVI 4-In-Camera

This 1080p full HD camera has a built-in OSD menu that can change the 4 different video outputs: HD-TVI, AHD, CVI, and CVBS(960H), and adjust the video settings.

Operation Mode：

Switch from AHD: Press Leftward for 5 Seconds
Switch from TVI: Press Rightward for 5 Seconds
Switch from CVBS: Press Upward for 5 Seconds
Switch from CVI: Press Downward for 5 Seconds
Noted: Default Video Mode is Analog 960H Mode    

Weather resistant camera

Camera used high quality materials, can effectively prevent rust, water, etc. Can be installed outdoor or indoor.

Multiple Application Camera

It could be widely installed in home, store, office, school and any place. Protect your family, parents, baby, property and everything.

Troubleshooting

Q: Video Loss appears where the image from my camera should be displaying on my DVR?

1.Check the extension cable (power and video) is securely connected to the camera.

2.Check the video output from the camera is securely connected to a video input channel on the DVR.

3.Check the power from the camera is securely connected to a power supply.

4.The camera mode do not match your DVR.There is 2 ways to setup：

(1) Press OSD Joystick “DOWN” 5 seconds,if still no picture come, try to press “LEFT” “RIGHT””UP” for 5 second, till the signal matching your DVR.

(2) Make sure the signal of your DVR, Use OSD Joystick to change the mode of the camera according to your DVRs video Mode.