You must have javascript enabled to use night-vision.org !

Nos Litton M2161 Intellicam Night Vision

Day/nite Ntsc Gen 3 18mm Intensifier

USD $799.00

Condition : New

Free Shipping

{{variant_type_name}} :
eBay
SKU: N/A This site contains affiliate links for which we may be compensated Sporting Goods / Hunting / Scopes, Optics & Lasers / Night Vision

Notify me when the price drops

We will email you if we find a lower price on this product!

Target price (USD) $

Includes one NOS Litton M2161 S/N 567 intensified NTSC day/night camera. This is a spare that was never put in to service. It has a Gen 3 image intensifier (or photo multiplier tube... PMT) inside.
Litton specs the PMT as an 18mm
Gen 3,filmed microchannel plate, proximity focused, non-inverting, gallium arsenide PC with peak sensitivity @ 840nm. Output window is P-43 phosphor.
As you can see in the internal photo, either the PMT or a relay lens, on a motor driven carousal, is put in line with an NTSC color camera and an external lens, depending on manual or external CDS photocell control. The camera is a Pulnix TMC-7b on adjustable sliding mounts.
The PMT has 3 wires leading to it, Vcc @ 12vdc (red, black) & a gain signal that ranges from 7.5 (low) to 10.8 (high) Vdc (white wire). The manual gain control from the rear connector (or AGC... selectable) does directly control the PMT gain. The PMT is potted within the carousal with black silicone.  The rear auto iris signal is from the board camera.
I think this might be able to be refitted with an HD board cam, or just disassembled to get to the PMT. The PMT would be great for astronomy or a home brew sight. This might also work with PVS-7 nvg.
The test photos were taken from a monitor (with signal from the internal board cam) since I can't access the back of the PMT directly. The poor image quality reflects this. The color shot is from the cam directly relayed from a 75mm f/1.3, 1" format lens. Then the PMT was switched in, the noisy image is in near total darkness (way to dark to see). The PMT shows no blems via the internal camera as seen in the last photo.
These are the only tests made.
The 2 phoenix connectors are included. Runs on 12-24 V ac/dc. *I will not ship to any address outside of the United States. ***Export of night vision equipment and optical sighting equipment is controlled by the U.S. Department of State Office of Defense Trade Controls, in accordance with International Traffic in Arms (ITAR), Title 22, Code of Federal Regulations Part 120—130 and/or the Export Administration Regulations (EAR) U.S. Department of Commerce. ITAR STATEMENT - Specifications subject to change without notice. Export of the commodities described herein is strictly prohibited without a valid export license issued by the U.S. Department of State Office of Defense Trade Controls prescribed in the International Traffic in Arms Regulation (ITAR), Title 22, Code of Federal Regulations, Parts 120-130. EXPORT REGULATIONS - It is unlawful to export, or attempt to export or otherwise transfer or sell any hardware or technical data or furnish any service to any foreign person, whether abroad or in the United States, for which a license or written approval of the U.S. Government is required, without first obtaining the required license or written approval from the Department of the U.S. Government having jurisdiction. Shipping is free UPS ground to 48 states, other states may cost extra.
NOS Litton M2161 IntelliCam Night Vision day/nite NTSC Gen 3 18mm intensifier
See more
Price type
IN STOCK OUT STOCK